Твердые сплавы.
Дата публикации: 18.09.2020 13:46
| Сплавы по AISI | Сплавы (China) | Сплавы по ГОСТ | Плотность (г/см3) | Твёрдость | Предел прочности (Н/мм2) | Основное применение |
| HRA (ISO3738) |
||||||
| K10 | YG6A | 14.9 | 92 | 1800 | Suitable for finishing and semi-finishing cast iron and Non-ferrous metal, also can be used for machining Manganese steel&Hardened steel | |
| EST-10 | 14.8 | 91.7 | 2000 | |||
| K20 | YG6 | ВК6 | 14.9 | 90.5 | 2100 | Черновая обработка чугуна. Фрезерование чугуна и низколегированной стали. |
| K30 | YG8 | ВК8 | 14.8 | 89.7 | 2300 | |
| K40 | ВК10 | |||||
| K44 | ВК10ОМ | |||||
| M05 | YS8 | 13.8 | 92.5 | 1800 | Suitable for finishing of iron alloy, nickel alloy &High strength steel. | |
| M10 | YW1 | 13.1 | 92 | 1600 | Suitable for finishing and semi-finishing of stainless steel & normal alloy steel | |
| EST30 | 14.3 | 91 | 2160 | |||
| M20 | YW2 | 13.0 | 91 | 1800 | Suitable for semi-finishing of stainless steel & normal alloy steel | |
| P10 | YT15 | 11.3 | 92 | 1800 | Suitable for finishing and semi-finishing of steel & cast steel, medium feed and high cutting speed | |
| P20 | YT14 | Т15К6 | 11.5 | 91.5 | 2000 | Чистовая и получистовая обработка стали и чугуна. |
| P30 | YT5 | Т5К10 | 13.0 | 91 | 2200 | Тяжелое черновое точение стали и чугуна, high feed and low cutting speed under bad working condition |
